18 Heads Air-Containing Aluminum Cap Beer Rinsing Filling Capping 3-in-1 Machine
Introduction of Wine drink cans filling machine The machine is composed by the filling and capping parts which produced by abroad introduced advanced technique. The performance and structure both are up to international level. The whole machine joins the mechanical, electric, and pneumatic ways to control.The auto control liquid level equipment fixed in the filler machine keeps the stable of the liquid level.
Features
1. Wholly sealed window structure which is beautiful, concise, easy and highly operated;
2. Cycling tank design with precision polishing inside;
3. High precision and large flow rate filling valves to meet productive requirement;
4. Specially designed roller structure which is easy to be adjusted, locked and ensure sealing function;
5. Friendly and convenient operating panel with high expansibility;
6. The filling valve adopts high precision mechanism valve, fast speed filling, high precision liquid level;
7. The filling vat adopts SUS304 material designed selaing vat, to achieve consitant pressure filling;
8. The flow rate of the filling valve ＞125ml/s;
9. Main transmission adopts toothed belt and gearbox open-type transmission assemblies, high efficiency, low noise;
10. The main drive adopts step-less speed change for frequency conversion, the whole machine adopts PLC control; the capping machine and filling machine adopts coupling joint, to ensure synchronization of two machines;
11. With filling with can, no filling without can;
12. The filling manner is constant pressure filling, with fast filling speed and stable action;
13. Seaming trolley adopts high hardness alloy steel quench (HRC＞62), capping curve adopts projection grinder precision machining, to ensure the quality of capping;
14. With capping with can , no capping without can control system, to ensure the normal running of the machine;
15. With CIP automatic rinsing function;
16. With centralized lubrication system.
| Equipment Type |
Automatic |
|
Bottle Type
|
Round or square glass bottle
Volume 200 - 1500ml
Bottle diameter 50-100mm
Bottle height 160-340mm
|
| Output <bph> |
up to 18000 bph |
| Your product |
Beer / wine / vodka / fruit wine and so on |
| Certificates |
CE / SGS / ISO 9001 |
Glass bottle Separating..
- Energy saving. High efficient. Adapt to customer factory layout
- Special lubrication system, keep products clean, health, safety
- Extended service life
- Electric eyes design keep whole line running safety and quickly
- Overload protection mechanism to effectively ensure the safety of the machine
Glass Bottle Washing.
1.Except the down framework, the transmission parts and some parts that must be made of special materials. Other parts are all made of stainless steel 304.
2.The roller bearing is made of stainless steel, the sealing ring is made of EPDM material, and plastic is made of UMPE.
3.The gripper is made of stainless steel, the position where hold the bottleneck is made of food standard rubber;
4.The gripper equipped with high-efficient spray nozzle, it can develop to any position of inwall of the bottle, and can save rinsing water. There is a cover above the spray nozzle which can prevent water spilling; and there are regulatory recycle slot and recycle pipes under the nozzles. 5.Rinsing time can be guaranteed for 4 seconds.
6.By adjusting the height of the rotary parts to adapt for different bottle height
7.The motivation is driven from the driven system in the framework passed by gear.
8.The supplying of rinsing water is controlled by solenoid valve
9.The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
10.The rinser is driven by driving system positioned inside machine frame via gear transmission.
11.Rinser using high-strength stainless steel bottles of spring-loaded folders, to ensure a stable reversal of the glass bottles. The nozzle is a plum-like structure can wash every corner of the side wall and bottom to make the bottle clean.
Glass Bottle Filling
Filling machine components mainly consist of filling cylinder, turntable, filling valve, lifting devices, upper and lower distributor, star wheel device, screw transmission device and main liquid pipe, etc.
Filling valve mainly consists of valve seat, spool, valve sleeve, middle sleeve, spring and air pipe, etc. The interior streamlined design ensures that there is no sanitary comer, built-in mechanical, stable and reliable performance, low maintenance costs.
Capping Part
1)Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
2)Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
3)The capper is equipped with inlet bottle detection switch.
4)Centrifugal way of cap arranging is adopted to reduce damage of caps.
5)A cap inspecting system is applied to control on-off of cap elevator.
6)Stainless steel plunger and mechanical stirring gland to ensure that the gland is healthy and reliable. The capper has the out loading function which could decrease the broken bottle number.
7)Special cap fixing and discharging mould for correct cap loading;
Competitive Advantage:
1. All the stainless steel is made of high quality of SUS304 material, good guarantee of food grade for beverage production line.
2. The water treatment machines are with good polish and nice appearance.
3. For the hollow fiber ultrafiltration machine, we have UPVC and stainless steel filter pipe for choice.
4. We can make the machines customised for you.
Home
>
PRODUCTS
>
Beer Filling Machine
>
